產品品牌：

牛威

產品型號：

N-510

產品用途：

散熱

質保時間：

2011-12-31

質保時間：

2011-12-31

結構形式：

垂直板式

材質：

碳鋼

連接形式：

對夾

適用介質：

水

壓力環境：

低壓

工作溫度：

低溫

標準：

國標

流動方向：

單向

驅動方式：

手動

零部件及配件：

配件

用途：

溫控

類型(通道位置)：

二通式

是否提供加工定制	是	材質	鑄鐵、不銹鋼等
連接形式	對夾單法蘭式	結構形式	垂直板式
適用介質	水、油品等	壓力環境	常壓
工作溫度	常溫	標準	德標
流動方向	雙向	驅動方式	手動、氣動等
用途	調節	類型(通道位置)	直動式
口徑	25& 350 mm	公稱通徑	NPS1～NPS14
安裝尺寸	DIN EN

 RADIATOR VALVEFOR OIL FILLED TRANSFORMERSize 25 to 350 mm    FEATURESGraded cast iron body to FG260 of IS210.All machining and drilling by CNC machines in close tolerance.Testing standards and specification exceed CBIP standards and specifications of reputed transformer manufacturers.100% valves tested for porosity and leakage.All valves are powder coated to provide complete surface protection for all weather conditions.No leakage from top spindle even without the protective cap.Protective cap will fit the valve top only when arrow shows the correct open / close position. SCOPE :  Radiator valve is a unit used to control the flow of transformer oil from the Transformerto the Radiator in oil cooled Transformer. The unit comprises of a Butterfly flap pivotingon a spindle for OPEN and CLOSE positions. The valve remains in OPEN-POSITIONwhen Transformer is “ON-LOAD”. For routine inspections and repairs of Radiators, turnthe Butterfly Flap to CLOSE POSITION. Size of Valve = 80mm. (Without Groove for Gasket) NATIONAL STANDARD   : Not available MATERIAL      : Recommended materials. Body & Cap      : Cast Iron to IS:210 Type FG 260. Spindle, Flap & Stoppers  : Carbon Steel as per IS:2073 Type C20 Fastners   : Stainless Steel (Non – Magnetic)           Grade to AISI – 304 / 316. Gasket   : Nitrile Rubber GENERAL :  Valve shall be capable of being operated with single hand by using a handle of 200mmLength (Approx). Valve shall be suitable to be locked in open and shut positions for indicating the aboveposition. Open and shut shall be cast on valve body & painted with white paint. A groove on the spindle head shall be provided to indicate the position of the valve whenthe cap is removed. An arrow on the cap shall be cast to indicate the valve position when cap is fitted arrowshall be painted with white paint. Bolt length and construction of the cap to be such that it can be fitted in one position onlyat a time i.e. arrow should indicate ‘SHUT’ when valve is closed & vice-versa M8 boltsshall be used for fixing the cap with valve body. TESTING : When oil pressure of 1.5 kg./Cm² is applied  to the assembled valve in closed / openposition. Leakage shall not be more than as specified below. Leakage through valve body whenPressure is applied for an hour-----------------  : NIL Leakage around Diaphragm (Flap) ----------- : Max. 5 drops / minute. Leakage through gland ------------------------- : NIL