NAIJJ Automatic Insulating Oil Dielectric Strength Tester NAIJJ全自動緣油介電強度測試儀
產品簡介
NAIJJ全自動緣油介電強度測試儀內設三只試驗油杯,可根據需要選擇各種試驗程序,可以選擇三油杯同時進行試驗,大大縮短了試驗時間。該儀器是一種具有全自動智能化程序控制功能且性能的多油杯耐壓測試儀,使用者需選擇試驗程序或自定義程序,儀器即可自動完成整個試驗過程,并儲存打印測試報表,通過U和RS232接口與電腦連接遠程控制;使原本枯燥的緣油耐壓試驗變得輕松快捷。
產品別名
緣油測試儀,油耐壓測試儀,緣油耐壓測試儀,油介電強度測試儀,緣油介電強度自動測試儀,緣油耐壓自動測試儀,全自動緣油耐壓測試儀,微電腦全自動緣油測試儀,自動試油機,全自動試油器,便攜式油耐壓試驗裝置,電強度測試儀
產品特性
1、擊穿檢測電路,在線實時擊穿監測,短時擊穿,回,擊穿時間小于1ms,避免緣油碳化或生成纖維;切斷電流小于5mA且可以任意設置切斷電流大小1.0mA~35mA;緣油的多次擊穿而不影響機、黑屏現象;
2、采用了微型TPU-A面板式打印機,自動性打印輸出
3、本儀器采用全自動磁振子攪拌,消除油樣的不均勻和氣泡
4、精密標準正弦發生電路及變比和反饋監控電路,測量準確;
5、智能程序控制,通過三次升壓三杯試品可循環進行試驗,大大縮短試驗時間,工作效率;
6、油杯內置調節螺母,快速、簡單、高地調整電間的距離,方便校準。
7、在儀器測試運行時,如果突然停電或三杯未執行完程序,微機自動記錄已測試的數據并暫停執行設定的程序直到再次通電將繼續按斷電前的程序運行。
產品參數
■試驗電壓0~80 kV;
■短擊穿時間小于1ms,小切斷電流范圍:1.0 mA~25 mA;設定值為11 mA
■實時網絡擊穿監測微機控制系統,快速切斷小于1ms。重復性好,避免緣油碳化或生成纖維;
■內置多種標準程序可選;
■采用激光自動識別杯位系統,多油杯加壓試驗或多油杯同時加壓試驗可選;
■執行國內標準GB507、IEC156;
■根據所選標準(或自定義標準)程序和試驗方式全自動操作;
■采用微處理器,精密標準正弦發生電路及變比和反饋監控電路,測量的準確度和實時性及性;
■故障自動警示:設置了接地保護、反相運行自動切換報警系統;
■160×128液晶顯示屏(4.7英寸);
■中英文友好界面,中英文菜單操作;
■內置打印機,可查詢和打印試驗報表;
■油面板和易讀式菜單操作,提供用戶界面及漏油油槽;
■保護罩和油杯使用緣材料全緣保護無局部放電現象、無電訊聲,采用機械電路雙重保護,油杯帶蓋,合IEC156/1995-05中避免試驗時測試油吸收潮氣的規定;試驗人員的;
■自動記錄試驗報表,可保存255條;
■升壓速率:采用電子調壓技術,準確升壓(1.0~3.0 kV/S)可調
■電壓測量及顯示分辨率:0.1kV
■總功率:1.5kVA
■擊穿切斷時間:1ms
■輸入電源:AC 220V±10%、50HZ±5%
■工作溫度:-2℃-45℃
■儲存溫度:5℃-30℃ (干燥通風) 環境溫度:≤80%RH
■體積:66cm×44cm×48cm(長×寬×高)
■包裝木箱:90cm×60cm×65cm(長×寬×高)
■重量:32 KG
Products introduction
NAIJJ automatic insulating oil dielectric strength tester is based on the international IEC-156 and international GB507-86 "insulating oil dielectric strength test" requirements, combined with the majority of users feedback, and then developed the fifth generation of full-automated instrumentation. The 16-bit micro-controller as the core control unit, all operations can all be preset, automatic calculate the average breakdown value, several breakdown times with good repeatability. Solve problem of crashing easily, It will carry a delivery test with 50 times continuously breakdown, no any crash at all.
Also called name
Insulating oil tester, oil withstand voltage tester, insulating oil withstand voltage tester, oil dielectric strength tester, insulating oil dielectric strength automatic tester, insulating oil withstand voltage automatic tester, automatic insulating oil withstand voltage testing device, microcomputer automatic insulating oil tester, automatic oil testing machine, full-automatic oil tester, portable oil withstand voltage testing equipment, electric strength tester
NAIJJ Automatic Insulating Oil Dielectric Strength Tester
Products Characteristics
1.NAIJJ automatic insulating oil dielectric strength tester with automatic detection function, such as boot automatically reset back to zero execution regulator.
2.Using a micro-TPU-A panel printer, automatic print and putout.
3.Can change testing times, stirring, standing time, light-activated & sound-activated ala, continuous print and non-print according to the user requirement.
4.NAIJJ automatic insulating oil dielectric strength tester with automatic magnon stirring, which can remove the oil sample inhomogeneity and bubbles.
5. Power supply: AC110V/115V/120V/127V/220V/230V/240V optional
6. Input frequency: 50Hz/60Hz optional









詢價




